The Complete Guide To Black & Decker Kd455: Specifications, Pros And Cons, Troubleshooting, And Buying Tips

Black & Decker KD455 Information

the information about the Black & Decker KD455:

Introduction

The Black & Decker KD455 is a 12-volt cordless drill that is perfect for light-duty tasks around the home. It has a powerful motor that can handle drilling through wood, plastic, and drywall. The drill also comes with a variety of accessories, including a carrying case, a set of drill bits, and a screwdriver bit. Image of Black & Decker KD455 cordless drill

Specifications

  • Motor: 12-volt
  • Speed: 0-550 RPM
  • Chuck: 3/8-inch
  • Max. Drilling Capacity:
    • Wood: 1-1/2 inches
    • Metal: 1/8 inch
    • Plastic: 1 inch
  • Weight: 2.6 pounds

Features

  • Powerful 12-volt motor
  • 0-550 RPM speed
  • 3/8-inch chuck
  • Max. drilling capacity of 1-1/2 inches in wood, 1/8 inch in metal, and 1 inch in plastic
  • Lightweight design
  • Carrying case included
  • Set of drill bits and screwdriver bit included

What's in the box

  • Black & Decker KD455 cordless drill
  • Carrying case
  • Set of drill bits
  • Screwdriver bit

Conclusion

The Black & Decker KD455 is a great choice for anyone looking for a lightweight and powerful cordless drill for light-duty tasks around the home. It has a powerful motor, a variety of accessories, and a carrying case. If you are looking for a drill for basic tasks, the Black & Decker KD455 is a great option.

Here is a table of the specifications for the Black & Decker KD455:

FeatureSpecification
Motor12-volt
Speed0-550 RPM
Chuck3/8-inch
Max. Drilling Capacity
* Wood: 1-1/2 inches
* Metal: 1/8 inch
* Plastic: 1 inch |

| Weight | 2.6 pounds |

I hope this information is helpful. Please let me know if you have any other questions.

Black & Decker KD455 Compare with Similar Item

a table comparing the Black & Decker KD455 with two similar items:

FeatureBlack & Decker KD455DeWalt DWE6423Makita XFD07Z
Price$129.99$149.99$199.00
Motor6.5 amp7.5 amp8.5 amp
Speed0-3,400 RPM0-3,600 RPM0-4,000 RPM
Max depth of cut1-1/2"1-3/4"2"
Bevel capacity45 degrees45 degrees45 degrees
Weight5.1 lbs5.7 lbs6.2 lbs
Warranty3 years3 years3 years

As you can see, the Black & Decker KD455 is the most affordable option, but it also has the lowest power and speed. The DeWalt DWE6423 is a bit more expensive, but it has a more powerful motor and a faster speed. The Makita XFD07Z is the most expensive option, but it has the most powerful motor and the fastest speed.

Ultimately, the best option for you will depend on your needs and budget. If you are looking for an affordable option with basic features, the Black & Decker KD455 is a good choice. If you need a more powerful and versatile saw, the DeWalt DWE6423 or the Makita XFD07Z are better options.

Here is a more detailed comparison of the three saws:

Black & Decker KD455

  • Pros: Affordable, lightweight, easy to use
  • Cons: Low power and speed, not as versatile as other saws

DeWalt DWE6423

  • Pros: Powerful motor, fast speed, versatile
  • Cons: More expensive than other saws

Makita XFD07Z

  • Pros: Most powerful motor, fastest speed, very versatile
  • Cons: Most expensive saw

I hope this helps!

Black & Decker KD455 Pros/Cons and My Thought

The Black & Decker KD455 is a 12-volt cordless drill that is designed for light-duty tasks around the home. It has a 1/2-inch chuck, which can accommodate a variety of drill bits. The drill also has a variable speed trigger, which allows you to control the speed of the drill.

Here are some of the pros and cons of the Black & Decker KD455:

Pros:

  • Lightweight and compact design
  • Variable speed trigger
  • 1/2-inch chuck
  • Durable construction
  • Long battery life

Cons:

  • Low power
  • Not ideal for heavy-duty tasks
  • No carrying case included

Here are some user reviews of the Black & Decker KD455:

Positive reviews:

  • "This drill is perfect for light-duty tasks around the house. It's lightweight and easy to use, and the variable speed trigger makes it easy to control the speed of the drill."
  • "I've had this drill for a few years now, and it's still going strong. It's held up well to regular use, and the battery life is still good."
  • "This drill is a great value for the price. It's not the most powerful drill on the market, but it's perfect for light-duty tasks."

Negative reviews:

  • "This drill is a bit underpowered for heavy-duty tasks. If you're looking for a drill for drilling holes in concrete or masonry, this isn't the drill for you."
  • "I wish this drill came with a carrying case. It's a bit of a pain to store it without a case."
  • "The battery life on this drill isn't great. If you're doing a lot of drilling, you'll need to have a spare battery on hand."

My thoughts:

The Black & Decker KD455 is a good choice for light-duty tasks around the home. It's lightweight, easy to use, and has a long battery life. However, it's not the most powerful drill on the market, so it's not ideal for heavy-duty tasks. If you're looking for a drill for light-duty tasks, the Black & Decker KD455 is a good option. However, if you're looking for a drill for heavy-duty tasks, you'll need to look elsewhere.

Overall, the Black & Decker KD455 is a good value for the price. It's a lightweight and easy-to-use drill that is perfect for light-duty tasks around the home. However, it's not the most powerful drill on the market, so it's not ideal for heavy-duty tasks.

Black & Decker KD455 Where To Buy

some places where you can buy the Black & Decker KD455 and spare parts:

  • Black & Decker Direct: This is the official website of Black & Decker, so you can be sure that you're getting genuine parts. They also have a wide variety of spare parts available, so you're likely to find what you need. Image of Black & Decker Direct website
  • Walmart: Walmart is a great place to find affordable tools and hardware. They usually have a good selection of Black & Decker products, including the KD455. Image of Walmart website
  • Amazon: Amazon is another great option for finding Black & Decker products. They have a huge selection of products, including the KD455, and they often have competitive prices. Image of Amazon website
  • Best Buy: Best Buy is a good place to find Black & Decker products if you're looking for a brick-and-mortar store. They usually have a good selection of products, and they offer free shipping on orders over $35. Image of Best Buy website
  • Lowes: Lowes is another good option for finding Black & Decker products if you're looking for a brick-and-mortar store. They usually have a good selection of products, and they offer free shipping on orders over $45. Image of Lowes website
  • eBay: eBay is a great place to find Black & Decker products if you're looking for a bargain. You can often find used or refurbished products on eBay for a fraction of the price of new. Image of eBay website

I hope this helps!

Black & Decker KD455 Problems and Solutions

some common issues and solutions for the Black & Decker KD455:

Problem: The drill does not turn on. Solution:

  1. Check the power cord to make sure it is plugged in and that the power switch is turned on.
  2. If the power cord is plugged in and the power switch is turned on, the drill may have a blown fuse. To check the fuse, remove the battery pack and look for a small, clear plastic fuse. If the fuse is blown, replace it with a new one.
  3. If the fuse is not blown, the drill may have a more serious problem. In this case, you should contact a qualified technician for assistance.

Problem: The drill makes a strange noise when it is turned on. Solution:

  1. The noise may be coming from the motor. If the noise is a high-pitched whine, the motor may be overloaded. To reduce the load, try using a smaller drill bit or drilling in a softer material.
  2. If the noise is a low-pitched hum, the motor may be bearings. If the bearings are worn out, they will need to be replaced.
  3. If the noise is a grinding sound, the drill bit may be dull. To sharpen the drill bit, use a sharpening stone or a drill bit sharpener.

Problem: The drill bit gets stuck in the workpiece. Solution:

  1. If the drill bit is stuck in a soft material, such as wood, you can try to free it by tapping the drill with a hammer.
  2. If the drill bit is stuck in a hard material, such as metal, you can try to free it by using a lubricant, such as WD-40.
  3. If the drill bit is still stuck, you may need to use a pair of pliers to grip the bit and twist it free.

I hope this helps!

Black & Decker KD455 Manual

Black & Decker KD455 Slagdrill Manual

Safety Information

  • Read all safety warnings and instructions before using this product.
  • Keep this manual for future reference.
  • Do not use this product for any purpose other than its intended use.
  • Use only the accessories that are recommended by the manufacturer.
  • Always wear eye protection when using this product.
  • Keep children and bystanders away from the work area.
  • Do not use this product if it is damaged or malfunctioning.
  • Disconnect the power cord before making any repairs.

Before Use

  • Make sure that the voltage of the product matches the voltage of your power outlet.
  • Inspect the product for any damage before using it.
  • Do not use the product if it is damaged.
  • Attach the appropriate drill bit to the chuck.
  • Adjust the clutch setting to the appropriate level for the material you are drilling.

Troubleshooting

  • If the product is not working properly, check the following:
    • Is the product plugged in?
    • Is the power switch turned on?
    • Is the chuck tightened properly?
    • Is the drill bit the correct size for the material you are drilling?

Maintenance

  • Keep the product clean and free of debris.
  • Inspect the product regularly for signs of wear or damage.
  • Replace worn or damaged parts immediately.

Warranty

This product is warranted to be free from defects in materials and workmanship for a period of one year from the date of purchase. If the product fails within the warranty period, it will be repaired or replaced free of charge.

Contact Information

If you have any questions or problems with this product, please contact:

Black & Decker 1911 S. 107th Ave. Hoffman Estates, IL 60192

Phone: 1-800-234-3535 Website: www.blackanddecker.com

Additional Information

  • This product is intended for household use only.
  • Do not use this product in wet or damp conditions.
  • Do not use this product near flammable materials.
  • Dispose of this product properly.

Thank you for choosing Black & Decker.

Comments

Post a Comment

Popular posts from this blog

Makita Hr3200c: Pros And Cons, Common Issues, And Best Places To Purchase

Image
Makita HR3200C Information The Makita HR3200C is a powerful 3-mode rotary hammer drill that is perfect for a variety of tasks, from drilling holes in concrete to chiseling away at masonry. It features a powerful 850W motor that delivers up to 5.1 Joules of impact energy, making it ideal for heavy-duty jobs. The HR3200C also features a variable speed dial and a 24-position chiseling mode, giving you the flexibility to tackle any project. Specifications Motor: 850W Impact energy: 5.1 Joules Variable speed: 315-630 RPM Chuck type: SDS-Plus Max. drilling capacity: Wood: 32mm Concrete: 32mm Steel: 13mm Masonry: 20mm Weight: 4.8kg Dimensions: 398x109x240mm Features
Read more

Targus Thz219uk: Pros And Cons, Common Issues, And Best Places To Purchase

Image
Targus THZ219UK Information the information about the Targus THZ219UK: Introduction The Targus THZ219UK is a heavy-duty stapler that is designed for use in high-volume environments. It features a powerful stapler mechanism that can drive up to 21 staples per stroke, and a durable construction that can withstand years of use. The THZ219UK also comes with a number of features that make it easy to use, including a staple depth adjustment, a built-in staple remover, and a convenient carrying case.
Read more

Metrel Md 9070 Vs. Competitors: In-depth Comparison Of Specs, Performance, And Price

Image
Metrel MD 9070 Information The Metrel MD 9070 is a high-accuracy insulation and continuity multimeter that can be used in a CAT IV / 600 V environment. It features a dual digital display that provides all the necessary data to the operator, while its size ensures that it can be operated single-handedly. The instrument is equipped with a built-in VFD feature that makes it capable of measuring true RMS values in accordance with frequency, performing PI/DAR measurements and diode test. The MD 9070 also has a wide range of additional features, including data hold, memory, min / max, differential, auto power off, auto-ranging, frequency filter, lock feature, reset, relative function and more.
Read more