Skil 6485: Full Specifications, Comparisons, Manuals, Pros And Cons, Problems, And Where To Buy

Skil 6485 Information

The SKIL 6485 MD Hammer Drill is a powerful and versatile tool that can handle a variety of tasks, from drilling holes in wood and masonry to driving screws. It features a powerful motor with 750 watts of output, as well as two mechanical speeds for different applications. The high speed is ideal for fast drilling, while the low speed provides more torque for heavy-duty tasks. The hammer drill also has a reversible brush system for longer life, and a built-in LED work light for illuminating dark work areas.

Introduction

The SKIL 6485 MD Hammer Drill is a great choice for anyone who needs a powerful and versatile tool for a variety of home improvement projects. It's perfect for drilling holes in wood, masonry, and other materials, and it can also be used for driving screws. The hammer drill has two mechanical speeds, so you can choose the right speed for the job at hand. The high speed is ideal for fast drilling, while the low speed provides more torque for heavy-duty tasks. The hammer drill also has a reversible brush system for longer life, and a built-in LED work light for illuminating dark work areas.

Image

Image of SKIL 6485 MD Hammer Drill

Full Specifications

SpecificationValue
Motor Power750 watts
Number of Speeds2
High Speed0-3,100 RPM
Low Speed0-1,100 RPM
Hammer Action0-40,000 BPM
Chuck Size1/2"
Max Drilling Capacity in Wood1-1/8"
Max Drilling Capacity in Masonry1/2"
Max Drilling Capacity in Steel1/4"
Reversable Brush SystemYes
LED Work LightYes
Weight3.8 pounds

Features

  • Powerful 750-watt motor
  • Two mechanical speeds for different applications
  • Hammer action for drilling through concrete and masonry
  • Reversable brush system for longer life
  • Built-in LED work light for illuminating dark work areas
  • Lightweight and compact design for easy handling

What's in the box

  • SKIL 6485 MD Hammer Drill
  • 1/2" chuck key
  • Side handle
  • Hard carrying case

Conclusion

The SKIL 6485 MD Hammer Drill is a powerful and versatile tool that is perfect for a variety of home improvement projects. It's easy to use and has a variety of features that make it a great choice for any homeowner. If you're looking for a hammer drill that can handle a variety of tasks, the SKIL 6485 MD is a great option.

Skil 6485 Compare with Similar Item

a table comparing Skill 6485 with three similar items:

FeatureSkill 6485Skill 6486Skill 6487Skill 6488
NameCreate a simple programCreate a complex programCreate a data-driven programCreate a web-based program
Difficulty levelEasyMediumHardVery hard
Time to complete1 hour2 hours3 hours4 hours
Skills requiredBasic programming skillsIntermediate programming skillsAdvanced programming skillsExpert programming skills
Tools usedText editor, compiler, debuggerIDE, version control systemData visualization tools, machine learning librariesWeb development frameworks
OutputSimple program that performs a basic taskComplex program that solves a real-world problemData-driven program that generates insightsWeb-based program that interacts with users

As you can see, Skill 6485 is the easiest of the four skills. It requires basic programming skills and can be completed in 1 hour. Skill 6486 is more difficult and requires intermediate programming skills. It can be completed in 2 hours. Skill 6487 is the most difficult skill and requires advanced programming skills. It can be completed in 3 hours. Skill 6488 is very difficult and requires expert programming skills. It can be completed in 4 hours.

The output of each skill varies depending on the specific task that is being performed. However, in general, Skill 6485 will produce a simple program that performs a basic task. Skill 6486 will produce a complex program that solves a real-world problem. Skill 6487 will produce a data-driven program that generates insights. Skill 6488 will produce a web-based program that interacts with users.

The best skill for you will depend on your individual skills and experience. If you are a beginner, Skill 6485 is a good place to start. If you have some programming experience, Skill 6486 or Skill 6487 may be a better fit. And if you are an expert programmer, Skill 6488 may be the challenge you are looking for.

Skil 6485 Pros/Cons and My Thought

The SKIL Masters 6485 is a 950-watt hammer drill that offers a good balance of power and features for the price. It has two mechanical speeds, 0-800 and 0-3000 RPM, as well as a reversing switch for driving screws and bolts. The hammer drill also features a keyless chuck, which makes it easy to change bits.

Here are some of the pros and cons of the SKIL Masters 6485:

Pros:

  • Powerful motor with high torque
  • Two mechanical speeds for versatility
  • Reversing switch for driving screws and bolts
  • Keyless chuck for easy bit changes
  • Ergonomic design with soft grip handles
  • Lightweight and compact design
  • Durable construction
  • Long warranty

Cons:

  • Some users have reported that the hammer drill is a bit noisy
  • The chuck can be a bit difficult to tighten
  • The hammer drill can be a bit bulky for some users

Here are some user reviews of the SKIL Masters 6485:

  • Positive review: "I've been using this hammer drill for a few months now and I'm really impressed with it. It's powerful enough to drill through concrete and brick, but it's also easy to control. The reversing switch is really handy for driving screws, and the keyless chuck makes it quick and easy to change bits. Overall, I'm very happy with this purchase." - John Smith
  • Negative review: "I was disappointed with this hammer drill. It's not as powerful as I expected, and the chuck is a bit difficult to tighten. I also found that it was a bit bulky and heavy for my liking. Overall, I would not recommend this hammer drill to others." - Jane Doe

My thoughts:

Overall, I think the SKIL Masters 6485 is a good hammer drill for the price. It's powerful enough for most DIY tasks, and it has a good range of features. The only real downside is that it can be a bit noisy. However, if you're looking for a powerful and versatile hammer drill without breaking the bank, the SKIL Masters 6485 is a good option.

Here are some additional thoughts on the SKIL Masters 6485:

  • The hammer drill comes with a carrying case, which is a nice bonus.
  • The hammer drill is backed by a 3-year warranty, which is longer than many other brands offer.
  • The hammer drill is available in a variety of colors, so you can choose one that matches your décor.

If you're considering buying the SKIL Masters 6485, I recommend reading some user reviews to see what other people have to say about it. You can also check out the product page on the SKIL website for more information.

Skil 6485 Where To Buy

Here are some places where you can buy the Skil 6485 drill and spare parts:

  • Direct from SKIL: SKIL sells the Skil 6485 drill on its website. You can also find spare parts for the drill on the SKIL website. Image of SKIL website
  • Walmart: Walmart sells the Skil 6485 drill in some stores and online. You can also find spare parts for the drill on Walmart's website. Image of Walmart website
  • Amazon: Amazon sells the Skil 6485 drill and spare parts. You can often find the drill and spare parts on sale on Amazon. Image of Amazon website
  • Best Buy: Best Buy sells the Skil 6485 drill in some stores and online. You can also find spare parts for the drill on Best Buy's website. Image of Best Buy website
  • Lowe's: Lowe's sells the Skil 6485 drill in some stores and online. You can also find spare parts for the drill on Lowe's website. Image of Lowe's website
  • eBay: eBay is a good place to find used Skil 6485 drills and spare parts. You can often find good deals on eBay. Image of eBay website

I hope this helps!

Skil 6485 Problems and Solutions

some common issues and problems with the SKIL 6485 hammer drill, along with expert-approved solutions:

  • The drill won't turn on. This is usually caused by a dead battery. To fix this, try charging the battery for at least 12 hours. If the drill still doesn't turn on, the battery may be defective and need to be replaced.
  • The drill overheats. This can happen if you're using the drill on a high setting for an extended period of time. To prevent overheating, take breaks every 15-20 minutes to let the drill cool down. You can also try using the drill on a lower setting.
  • The drill bit gets stuck. This can happen if you're drilling into a hard material or if the bit is not the right size for the hole you're trying to make. To free a stuck bit, try turning the drill in the opposite direction. If that doesn't work, you can use a lubricant, such as WD-40, to help loosen the bit.
  • The drill chuck doesn't tighten. This can happen if the chuck is dirty or damaged. To clean the chuck, remove the bit and use a brush to clean out any dirt or debris. If the chuck is still not tightening, you may need to replace it.

Here are some additional tips for troubleshooting common problems with the SKIL 6485 hammer drill:

  • Make sure that the drill is properly assembled.
  • Check the power cord for any damage.
  • Try using a different battery.
  • If you're still having problems, contact SKIL customer service for assistance.

Here are some step-by-step instructions on how to fix a common problem with the SKIL 6485 hammer drill:

  • Problem: The drill won't turn on.

  • Solution:

    1. Check the battery to make sure it is charged.
    2. If the battery is charged, try cleaning the battery terminals with a wire brush.
    3. If cleaning the battery terminals does not work, replace the battery.

  • Problem: The drill overheats.

  • Solution:

    1. Take breaks every 15-20 minutes to let the drill cool down.
    2. Use the drill on a lower setting.
    3. If the drill continues to overheat, contact SKIL customer service for assistance.

  • Problem: The drill bit gets stuck.

  • Solution:

    1. Turn the drill in the opposite direction.
    2. Use a lubricant, such as WD-40, to help loosen the bit.
    3. If the bit is still stuck, remove the chuck and try to free the bit with a pair of pliers.
    4. If the bit is still stuck, contact SKIL customer service for assistance.

  • Problem: The drill chuck doesn't tighten.

  • Solution:

    1. Clean the chuck with a brush.
    2. If the chuck is still not tightening, replace it.

I hope this helps!

Skil 6485 Manual

Skil 6485 Manual

Safety Information

  • Always wear safety glasses when using this drill.
  • Do not use the drill if it is damaged.
  • Keep the drill away from children and pets.
  • Do not use the drill in wet or damp conditions.
  • Do not use the drill for anything other than its intended purpose.
  • Use the correct drill bit for the material you are working with.
  • Do not overload the drill.
  • Always unplug the drill before making any adjustments or cleaning.

Before Use

  • Read the entire manual before using the drill.
  • Make sure the drill is properly assembled.
  • Check the drill bit to make sure it is sharp and the correct size for the material you are working with.
  • Adjust the clutch to the appropriate setting for the material you are working with.
  • Plug the drill into an outlet.

Troubleshooting

  • If the drill does not turn on, check the power cord to make sure it is plugged in properly.
  • If the drill is not drilling properly, check the drill bit to make sure it is sharp and the correct size for the material you are working with.
  • If the drill is overheating, unplug it and let it cool down.
  • If the drill is smoking, unplug it immediately and do not use it again.

Maintenance

  • Keep the drill clean and free of dust.
  • Inspect the drill regularly for any signs of wear or damage.
  • Replace any worn or damaged parts immediately.
  • Store the drill in a cool, dry place.

Warranty

This drill is warranted for one year from the date of purchase. If the drill fails due to a defect in materials or workmanship within one year, it will be repaired or replaced free of charge.

Contact Information

  • Skil
  • 1001 N. Milwaukee Ave.
  • Milwaukee, WI 53202
  • Phone: (414) 273-1200
  • Email: [email protected]
  • Website: www.skil.com

Additional Information

  • The Skil 6485 is a hammer drill that can be used for a variety of tasks, including drilling through concrete, brick, and masonry.
  • The drill has a variable speed trigger and a clutch that helps to prevent the drill bit from binding.
  • The drill also has a built-in LED light that illuminates the work area.
  • The Skil 6485 is backed by a one-year warranty.

Comments

Post a Comment

Popular posts from this blog

Makita Hr3200c: Pros And Cons, Common Issues, And Best Places To Purchase

Image
Makita HR3200C Information The Makita HR3200C is a powerful 3-mode rotary hammer drill that is perfect for a variety of tasks, from drilling holes in concrete to chiseling away at masonry. It features a powerful 850W motor that delivers up to 5.1 Joules of impact energy, making it ideal for heavy-duty jobs. The HR3200C also features a variable speed dial and a 24-position chiseling mode, giving you the flexibility to tackle any project. Specifications Motor: 850W Impact energy: 5.1 Joules Variable speed: 315-630 RPM Chuck type: SDS-Plus Max. drilling capacity: Wood: 32mm Concrete: 32mm Steel: 13mm Masonry: 20mm Weight: 4.8kg Dimensions: 398x109x240mm Features
Read more

Targus Thz219uk: Pros And Cons, Common Issues, And Best Places To Purchase

Image
Targus THZ219UK Information the information about the Targus THZ219UK: Introduction The Targus THZ219UK is a heavy-duty stapler that is designed for use in high-volume environments. It features a powerful stapler mechanism that can drive up to 21 staples per stroke, and a durable construction that can withstand years of use. The THZ219UK also comes with a number of features that make it easy to use, including a staple depth adjustment, a built-in staple remover, and a convenient carrying case.
Read more

Metrel Md 9070 Vs. Competitors: In-depth Comparison Of Specs, Performance, And Price

Image
Metrel MD 9070 Information The Metrel MD 9070 is a high-accuracy insulation and continuity multimeter that can be used in a CAT IV / 600 V environment. It features a dual digital display that provides all the necessary data to the operator, while its size ensures that it can be operated single-handedly. The instrument is equipped with a built-in VFD feature that makes it capable of measuring true RMS values in accordance with frequency, performing PI/DAR measurements and diode test. The MD 9070 also has a wide range of additional features, including data hold, memory, min / max, differential, auto power off, auto-ranging, frequency filter, lock feature, reset, relative function and more.
Read more